Advancing the UV/EUV
Measurement Science
AXUV Series
100% Internal Quantum Efficiency in the UV/EUV
AXUV Information
- Standard Products
- Operating Principles
- Applications
- Electron Detectors
- Ion Detectors
- Quantum Efficiency Stability
- Absolute X-Ray Detectors
AXUV Products
- Single Element
(Absolute Devices Transfer Standards) - Quadrant/Position Sensing
- Arrays (Linear)
- Arrays (Concentric)
- Arrays
(2 Dimensional) - Split Geometries
- High Speed
- Directly Deposited Filters
- Electron Detectors
- Transmission Detectors
UVG Series
100% Internal Quantum Efficiency and Improved Stability in the UV
UVG Information
- Standard Products
- Operating Principles
- Radiation Hardness
- Quantum Yield
- Responsivity
- Linearity
- Uniformity
- Responsivity Stability
- Performance Characteristics
UVG Products
SXUV Series
Hundred of gigarads of radiation hardness; no degradation on exposure to 100 eV photons
SXUV Information
- Standard Products
- Responsivity Stability
- CW Responsivity
- Pulse Responsivity
- Performance Characteristics
SXUV Products
PN Series
Newly available diodes with a p-on-n structure and 100% IQE between 350 and 940 nm.
PN Diodes: Information
PN Diodes: Information
Electronics
- BT-250 BiasTee
- PA-100
- PA-100V
- PA-13
- AXUV20AHYB1
- AXUV100HYB
- AXUV100HYB1V/Cu
- AXUV-16ELOHYB1
- AMP16, Amplifier for AXUV16EL
- QSP1,Quadrant Diode Amplifier for Position Sensing (PS) Diodes
Technical Information
- Temperature Dependence
- Time Response
- Noise Characteristics
- Linearity
- Polarization Sensitivity
- Proper Usage
- Handling
- Vacuum Compatibility
Services
Contact/Facilities
International Radiation Detectors, Inc.PA13: Multi-channel System for Pulse Energy MeasurementThe PA13 detection system is an instrument that measures the illumination intensity in a pulsed environment. This system produces an output voltage that is proportional to the intensity of pulsed radiation incident on the IRD photodiodes. This is achieved by charge amplification and integration. The PA13 incorporates a self-test feature that allows users to exercise the functionality of the detection system without requiring illumination of the detector. The PA13 Multi-channel Pulse Detection System contains up to 10 identical channels which include the following instrumentation: (1) a preamplifier board which amplifies the charge produced from pulse radiation incident on the photodiode, (2) a driver board which provides the power to drive the signal over long cables and (3) a sampler board that samples the pulse produced by the preamplifier and provides an output voltage proportional to the input charge. The sampler board also provides power to the entire detector chain. Following table describes specifications of the PA13 system :
|
