Advancing the UV/EUV
Measurement Science
AXUV Series
100% Internal Quantum Efficiency in the UV/EUV
AXUV Information
- Standard Products
- Operating Principles
- Applications
- Electron Detectors
- Ion Detectors
- Quantum Efficiency Stability
- Absolute X-Ray Detectors
AXUV Products
- Single Element/Absolute Devices Transfer Standards
- Quadrant/Position Sensing
- Arrays
- High Speed
- Directly Deposited Filters
UVG Series
100% Internal Quantum Efficiency and Improved Stability in the UV
UVG Information
- Standard Products
- Operating Principles
- Radiation Hardness
- Quantum Yield
- Responsivity
- Linearity
- Uniformity
- Solar Blind UV Detectors
- Responsivity Stability
- Performance Characteristics
UVG Products
SXUV Series
Hundred of gigarads of radiation hardness; no degradation on exposure to 100 eV photons
SXUV Information
- Standard Products
- Responsivity Stability
- CW Responsivity
- Pulse Responsivity
- Performance Characteristics
SXUV Products
Electronics
- BT-250 BiasTee
- PA-100
- PA-100V
- PA-13
- AXUV20AHYB1
- AXUV-100HYB
- AXUV-16ELOHYB1
- AMP16, Amplifier for AXUV16EL
- QSP1,Quadrant Diode Amplifier for Position Sensing (PS) Diodes
Technical Information
- Temperature Dependence
- Time Response
- Polarization Sensitivity
- Proper Usage
- Handling
- Vacuum Compatibility
Contact/Facilities
International Radiation Detectors, Inc.PA100V Pulse Amplifier DescriptionThe PA100V amplifier consists of three main components which are a ceramic board PA100V pre-amp, PA100V control box and a ceramic transition board which connects pre-amp with the control box. The pre-amp is a vacuum compatible, programmable gain amplifier. The gain control and connections to signal, power etc. of the pre-amp are provided by the control box which can be mounted directly on the vacuum system wall. The PA13 sampler board will provide the power to the whole circuit and also provide a voltage proportional to the charge developed in the detector. The pre-amp board can accept AXUV/SXUV 20 and AXUV/SXUV 100 devices. The detectors can be reverse biased up to 12 Volts. The PA100V is a pulse amplifier used to counteract the effects of attenuating signal cables on small signals generated from photodiodes. The PA100V accomplishes this function by isolating the detected photodiode signal from the line inductance and capacitance typical of coaxial signal cables. This isolation function allows very small photodiode signals (on the order of 10 fC) to be transmitted over several feet of common 50 ohm coaxial cables without being corrupted by noise pick-up. Features
Specifications
|
